Blog
The Effect of Defoamers on Concrete Strength
In hardened cement concrete, internal porosity represents the single most decisive factor governing overall compressive and flexural strength. During the mixing process, mechanical agitation entrains substantial amounts of unstable air, creating harmful macro-voids (typically larger than 200 micrometers in diameter) that severely weaken the internal matrix and cause surface honeycombing and bug holes.
Incorporating specialized concrete defoaming agents (antifoams) simultaneously prevents bubble generation and destabilizes existing air films. By reducing total air content from 4.5%–6.5% down to 1.5%–3.0%, defoamers optimize micro-pore structure and significantly increase paste density, boosting 28-day concrete compressive strength by 10% to 25% while dramatically improving surface aesthetics and long-term durability.
The Fundamental Relationship Between Concrete Porosity and Strength
As cement hydrates, it forms calcium silicate hydrate (C-S-H) gel, calcium hydroxide crystals, and an interconnected network of pores. In concrete materials science, mechanical compressive strength is inversely related to total internal porosity. Any internal void reduces the effective cross-sectional load-bearing area of the solid matrix. Furthermore, under structural compression or tensile stress, internal voids act as high-stress concentration points, serving as initiation sites for micro-cracks that propagate and cause premature structural failure.
Concrete technology classifies internal voids into three distinct categories based on their physical scale and impact on performance:
- Harmless and Low-Harm Micro-Pores (Under 50 nm): Primarily gel pores and fine capillary pores that do not degrade compressive strength.
- Harmful Pores (50 nm to 200 nm): Larger capillary pores that facilitate moisture and chemical ingress, moderately reducing strength.
- Severely Harmful Macro-Voids (Over 200 nm, especially visible voids > 1 mm): Coarse, irregular air pockets generated during mixing. These voids create structural discontinuities and surface defects such as honeycombing and bug holes. The primary purpose of a concrete defoamer is to systematically eliminate these severely harmful macro-voids.
How Air Voids Form and Become Trapped in Fresh Concrete
Air bubbles in freshly mixed concrete originate from three primary operational and chemical factors:
- Mechanical Air Entrainment: As mixer blades rotate at high speeds through aggregate and cementitious paste, ambient air is drawn in and broken into countless micro-bubbles under turbulent shear forces.
- High Slurry Viscosity Traps Air: Fresh concrete exhibits non-Newtonian plastic viscosity and yield stress. Because air bubble buoyancy velocity is inversely proportional to the viscosity of the surrounding medium, the heavy, viscous cement slurry exerts strong drag resistance that prevents entrained air from rising and escaping before setting.
- Superplasticizer Surfactant Activity: Modern polycarboxylate ether (PCE) superplasticizers possess amphiphilic molecular structures that lower liquid-gas surface tension. They spontaneously adsorb at bubble interfaces, forming resilient electrical double-layer films that stabilize bubbles and prevent natural coalescence and bursting.
Dual Working Mechanisms of Concrete Defoaming Agents
Concrete defoamers are specialized chemical additives characterized by extremely low surface tension, controlled insolubility, and superior surface spreading ability. They operate through two synchronized physical-chemical mechanisms:
Destabilizing Existing Bubbles (Defoaming Action)
When air bubbles have already formed, finely dispersed defoamer droplets rapidly migrate to the bubble liquid film. Due to their hydrophobic nature and lower surface tension, defoamer molecules displace the surfactant stabilizing layer, creating local surface tension gradients. This induces rapid film thinning and liquid drainage, causing the bubble wall to rupture so entrapped air can escape to the surface.
Inhibiting New Bubble Nucleation (Antifoaming Action)
Defoamer molecules distributed throughout the aqueous phase prevent incoming air from being encapsulated into stable elastic films during mixing. Instead, newly introduced micro-bubbles are forced to rapidly coalesce into large, unstable air pockets that quickly rise and vent out of the slurry before initial set.
Chemical Types of Concrete Defoamers and Selection Criteria
Modern concrete admixture formulation relies on three primary chemical families of defoamers:
- Polyether Defoamers (EO/PO Block Copolymers): Excellent water compatibility, zero oil-floating issues, and outstanding stability when blended directly into polycarboxylate superplasticizer mother liquor. Ideal for standard ready-mix concrete, precast elements, and self-leveling mortar.
- Silicone Defoamers (Polydimethylsiloxane / Siloxane): Characterized by rapid knockdown of existing foam and ultra-low surface tension at very low dosages. Requires careful emulsification to prevent phase separation during long storage.
- Polyether-Modified Silicone Defoamers: Combines the superior compatibility of polyethers with the potent defoaming power of silicones. Highly recommended for Ultra-High-Performance Concrete (UHPC), self-compacting concrete (SCC), and architectural fair-faced concrete.
Optimal Dosage and Application Guidelines
To maximize compressive strength gains without compromising durability, formulation specialists follow several key guidelines:
- Recommended Dosage Range: Typically 0.01% to 0.05% by total weight of cementitious materials (or 0.1% to 0.5% by weight of superplasticizer liquid). Over-dosage should be avoided to prevent surface oil-spotting or excessive air reduction in freeze-thaw zones.
- “Defoam-Then-Air-Entrain” Strategy: In cold climates requiring high freeze-thaw durability, formulators first use defoamers to eliminate irregular macro-voids, and then introduce high-grade air-entraining agents to create uniformly spaced, microscopic closed air bubbles (under 100 nm). This dual strategy achieves both high compressive strength and outstanding frost resistance.
- Adequate Wet-Mixing Time: Ensure at least 60 to 90 seconds of thorough wet mixing so defoamer droplets disperse uniformly throughout the paste interface.
FAQ
Q1: Why does adding a defoamer increase concrete compressive strength so significantly?
Hardened concrete strength is directly determined by its internal density and porosity. Air bubbles entrained during mixing create large structural voids (>200 nm) and weak interfacial zones. Defoamers remove these harmful voids, increasing the effective load-bearing cross section of the cement matrix and boosting compressive strength by 10% to 25%.
Q2: When does the defoamer perform its chemical action during the concrete lifecycle?
Defoamers function exclusively while the concrete remains in its plastic, unhardened state—during mixing, transit, pouring, and vibration prior to initial set. Once the cement matrix hardens into a rigid solid skeleton, the defoamer becomes inert.
Q3: Does every concrete mix design require an added defoaming agent?
While low-grade non-critical mixes may omit it, defoamers are indispensable in high-performance concrete (C50+), Ultra-High-Performance Concrete (UHPC), self-compacting concrete, architectural precast panels, and polycarboxylate-plasticized mixes to eliminate surface bug holes and maximize mechanical capacity.
Conclusion
Concrete defoaming agents serve as both an aesthetic beautifier for eliminating surface honeycombing and a vital micro-structural enhancer for maximizing compressive strength. By systematically purging unstable macro-voids, refining pore architecture, and densifying the hardened cement matrix, defoamers enable engineers and ready-mix producers to achieve high strength, low permeability, and superior architectural quality across demanding construction projects.
Related Blogs

How to deal with the mildew of polycarboxylate superplasticizer
Blog How to deal with the

How to adjust cement when encountering abnormal situations with water-reducing agents?
Blog How to adjust cement

6 major challenges to be solved in the research of polycarboxylate superplasticizers
Blog 6 major challenges t