Blog

The negative impact of water reducing agents on concrete shrinkage and cracking

Principle of action of concrete water reducing agents

Dispersing effect

Due to the gravitational force on cement particles, when cement is mixed with water, 10-30% of the mixing water is wrapped around the cement particles, forming a cement slurry flocculation structure, which affects the fluidity of the concrete mixture and prevents free flow and lubrication.

Due to the directional adsorption of water-reducing agent molecules on the surface of cement particles, when water-reducing agents are added to concrete, electrostatic repulsion is formed on the surface of cement particles, promoting their dispersion and carrying the same charge. This breaks down the coagulation structure and releases the encapsulated water, which can freely participate in the flow after release, effectively increasing the fluidity of concrete.

Lubrication effect

The strong hydrophilic groups in water reducing agents can effectively adsorb onto the surface of concrete particles to form an adsorption film. This adsorption film can form a stable solvation water film with lubricating function with water molecules. Therefore, water-reducing agents can further improve the fluidity of concrete and effectively reduce the sliding resistance between cement particles.

Spatial hindrance effect

The hydrophilic polyether side chains in the structure of water reducing agents act on the aqueous solution in the gaps of concrete structures, forming a three-dimensional hydrophilic adsorption layer with a certain thickness that adsorbs onto the surface of cement particles.

When cement particles approach, a spatial hindrance effect is generated between the cement particles, and the adsorption layer begins to overlap. The more overlap there is, the greater the hindrance to the agglomeration of cement particles, and the greater the spatial repulsion, which can effectively maintain the slump of concrete.

The sustained release effect of graft copolymer branches

In the preparation process of new water reducing agents, such as polycarboxylate water-reducing agents, some branched chains are grafted onto the molecules of the water-reducing agent. These branched chains can be slowly cut off in the high-alkalinity cement hydration environment, releasing polycarboxylates with fractional effects and providing a steric hindrance effect, which can improve the dispersion effect of cement particles and control slump loss.

The negative impact of water reducing agents on concrete shrinkage and cracking

The characteristics of water-reducing agents directly affect the shrinkage performance of concrete. Under the same slump conditions, the shrinkage rate of concrete with water reducing agents is about 35% higher than that without water reducing agents, making it more prone to cracking. The reasons are as follows:

The water reduction effect is highly dependent on the raw materials and mix proportions of concrete.

The water reduction rate of concrete is a very strict definition, but it is often misunderstood. In many different situations, people always use the water reduction rate to represent the water reduction effect of a product.

At lower dosages, taking polycarboxylate superplasticizer as an example, it has been proven that its water reduction rate is much higher than that of other types of superplasticizers, and it has a better water reduction effect. However, it must be noted that compared to other water-reducing agents, the water-reducing effect of polycarboxylate superplasticizers is more affected by experimental conditions.

Among the factors affecting the plasticizing effect of polycarboxylate superplasticizers, the sand ratio and particle size distribution of aggregates in concrete also have a significant impact. The plasticizing effect of polycarboxylate superplasticizers is greatly affected by the mud content of fine aggregates compared to other high-efficiency superplasticizers such as the naphthalene series.

The water reduction effect is highly dependent on the dosage of water reducing agents

In general, as the dosage of water reducing agents increases, the water reduction rate of concrete also increases; especially for polycarboxylate water-reducing agents, the dosage directly affects the water reduction effect.

However, there are exceptions in practical applications, where the water-reducing effect decreases with an increase in the dosage after a certain amount is added. This is because, at this point, the concrete mixture is compacted, and severe bleeding occurs in the concrete. The slump method can no longer represent its fluidity.

The performance of the prepared concrete mixture is highly sensitive to water usage

The performance indicators of concrete mixtures are usually reflected in water retention, cohesiveness, flowability, and other aspects. Concrete prepared with polycarboxylate superplasticizer does not always fully meet the usage requirements, and the performance of the prepared concrete mixture is very sensitive to water consumption, often resulting in some problems.

Therefore, in actual experiments, some terms are usually used to vividly describe the performance of concrete mixtures, such as severe bleeding and segregation, heap scraping, severe exposed stones, etc.

Precautions for safe use of polycarboxylate superplasticizers

Improve technical level, stabilize product quality, and strengthen technical reserves

Enterprises producing polycarboxylate superplasticizers are recommended to actively cooperate with universities and research institutes, adjust synthesis process parameters in a timely manner, fully understand various factors that affect the performance of polycarboxylate superplasticizer products, stabilize product quality through joint or independent research and development, and further adapt to market demand through innovative products.

Strengthen trial mix design in combination with engineering

Using raw materials used in the project, trial-mix concrete with admixtures, and test under the same conditions as the construction conditions. Determine the testing items according to the design and construction requirements.

When the performance requirements of concrete or the raw materials used in the project change, the trial mixing test of adding concrete water reducer should be conducted again.

It is strictly prohibited to mix other types of additives

The compounding of polycarboxylate superplasticizers can only be carried out by additive manufacturers or suppliers. Water reducer users only need to test and accept their relevant performance, and are not allowed to mix other components or compound any other components into it.
2. Equipment for fixing concrete with polycarboxylate superplasticizer, such as concrete transport vehicles, mixing equipment, pumping equipment, etc.

4.Quality Control

Regular quality control tests should be conducted to ensure that the chemical admixtures are of the required quality and that their addition to the concrete results in the desired properties.

This includes testing the workability, strength, and durability of the concrete.

Conclusion

Chemical admixtures in concrete are essential for improving its performance and durability. They offer many benefits, from enhancing workability to increasing strength and improving resistance to various environmental factors.

However, their use requires careful consideration of dosage, compatibility, environmental impact, and quality control. By understanding and properly using chemical admixtures, the construction industry can produce higher-quality concrete structures that are more durable and meet the specific requirements of different projects.

Send Your Inquiry Now

EXPLORE OUR PRODUCT RANGE

PCE MONOMERS • PCE • SNF

Product information, specifications & applications — sent directly to your email.

*Your information is kept confidential and will only be used to contact you regarding our products.